If you want the exact list I used, contact me e-mail and I can give you the names of lottery winners I used and you can probably get their charts from the above mentioned database. Now I can look at the transits to my Jupiter-Uranus midpoint, which are in trine natally. Good luck to everyone, and thanks for posting this research. I am really interested about the subject.. In my natal. Also my venus, north node,chiron,satrun are in aries.. Any idea what might happen?
Hello Funda, You are for sure going to have an interesting experience as Jupiter and Uranus cross I am not sure of the exact degrees of the planets in Aries your planets in Aries. Jupiter Uranus conjunction occurs for the last time in January and then Jupiter will move on by March.
Of course with Jupiter most probably the effects will be beneficial unless you Jupiter is badly aspected. With Jupiter, the main thing to watch is going overboard with your spending,e tc, especially when Jupiter conjuncts your Venus. When Uranus transits it take Uranus quite a few years to cross one zodiac sign , be prepared for some shaking and turning, and hopefully it is only temporary. Its better in the long run to experience Uranus without making any permanent changes because the effects of Uranus transits are usually temporary unlike Pluto transits.
Watch out for relationship issues when Uranus transits your Venus either you or people close to you may demand more freedom and for new relationships to crop up when transiting North Node. Please let us know your experience with the transits when they happen! Uranus is squaring my Midheaven right now and will be exact by the end of March.
Hello AriesSunCapricornMoon, that sounds like a good idea. Good luck — if you do win, let us know! I searched for Uranus conjunction to natal Jupiter and this is one of the first things that popped up on Google. Interesting that it is a study of lottery winners! Also studied moon aspects to the fantasy five and have found a correlation in declinations there. Did you study too, the declinations? Magi astrology is built around declinations and that is how I became interested in them. I am confused, I know jupiter, venus, mecury and uranus are in Aries.
Hello Traci: I have not studied or researched declinations in relations to Jupiter Uranus as of yet, but could be another factors that effects the outcome. Good Luck with your research. Hello Nimal, 4 deg 56 for Richard Waibel means that his Jupiter Uranus midpoint is located at 4 degree 56 minutes of Libra longitude. On the day of the lottery winning this point has a transit from Uranus. Basically the Jupiter Uranus midpoint is the shortest calculated center between his Jupiter and Uranus and you can find your Jupiter Uranus manually by following what Nicole has explained in the 4th comment in this section OR use the website noendpress URL is given by Ariel in the 7th comment from top in this section.
Basically you enter the degree and minutes of your Jupiter and Uranus as in your natal chart and this calculator tool will give your Jupiter Uranus midpoint.
- Magi Astrology Planetary Symbolisms;
- left cheek twitching astrology.
- Navigation menu.
Just getting into astrology again am researching into people big lottery winners etc. Jupiter conjunct Jupiter. Solar Arc: juniper progressed conjunct natal Uranus in the 12th, progressed Uranus in the 2nd sextile natal Uranus and trine natal Jupiter. Progression: Moon prog conjunct natal Uranus, Asc progressed to the cusp of the 2nd house Virgo. There are many more transits and progression going on at the same time does this aspects qualify for a money winner.
A conjunction between transiting jupiter and natal uranus is going to be on my eight house.
- gold number 3 birthday candle?
- weekly tarot reading october 14 2019!
- december 2019 horoscope for aquarius.
- horoscope for cancer december 4 2019.
- are piscess compatible with pisces.
Venus retrograde is going to be there too and my natal uranus is conjunt natal moon. Natal jupiter is on my twelve house and aquarius is on my natal fifth, Any idea of what is coming? Thanks, Plutonian.
Thank you for publishing this interesting research. Does it make a difference whether the transit is happening in forward motion or retrograde? I have been trying to figure out when would be a good time for my own lottery experiment. Right now, I guess transiting Uranus is sextile my MC, but that will change in a few months when Uranus moves into its 5 month retrograde period.
Sometimes astrology makes me feel like a mathematician. Anyway, I thought I would ask about whether your research shows a difference between retrograde and forward transits. Take care, and good writing! Hi Sandy, I never did test the difference between retrograde and forward motion in this research, but it is a another good factor to check.
Good Luck! An impressive share! And he in fact bought me lunch due to the fact that I discovered it for him… lol. So allow me to reword this….
The Divine Astrological System Gives Us Gifts When We Were Born
Thank YOU for the meal!! But yeah, thanx for spending the time to discuss this topic here on your web page. I always win when the sign of leo is on the raising or 5th house. That is why he devoted much of his life towards the goal of trying to discover additional planets. Unfortunately for him, astronomers had limited tools in his time and could not see what modern astronomers now see; they could not even see Pluto.
Which was why Albert Witte ended up proposing hypothetical planets. In our third book, the Magi Society discussed why astrology needed more planets in order to be complete. Astrology is supposed to explain every aspect of human life - but there are so few planets and so much to try to explain. With just eleven "planets" the classic nine planets plus the Sun, Moon and Chiron there were not enough known astrological bodies to explain all of life.
Even if you add the four major asteroids, astrology is still missing the planets necessary to account for all the numerous aspects of life. For example: What planetary aspects are representative of being highly logical, or highly emotional, or having musical abilities, or being a great painter, singer, golfer, teacher or race car driver? What planetary aspects symbolized greed, fear, loving to eat, ability to make money, being stable as opposed to being out of control, being a liberal as opposed to a conservative, being loyal and faithful as opposed to being a serial cheat, being an atheist as opposed to having faith in Divine Providence, wanting to raise a family as opposed to never wanting to marry?
And since election year is coming, what planetary aspects represent political savvy and power versus amateur hour? The answers are always in the stars and with the help of Trans-Neptunian Dwarf Planets, we will now know more of the answers. The Magi Society has just concluded its five-year research project into the astrology of Trans-Neptunian Dwarf Planets and we will be posting articles about this on this website and our Members Only Website.
In addition to the 36 data-entry boxes, there are at least 17 Program Control data entry boxes. The data you enter in these boxes tells AstroGeometry how to process the time and location data you enter in the 36 Time and Location boxes and how to display the results of those processes.
- 5D Astrology 2016 QUAOAR.
- gemini horoscope born december 6?
- gemini daily horoscope 12 december 2019.
- sagittarius weekly horoscope december 12.
We will cover that section later in greater detail. The Data Display Area:. The Data Display area can be hidden from view by closing the pop up window. It is scrollable and will display only those planets you have selected using the functions of the Select Planets Menu Bar selection. Your AstroGeometry has menus for all of the features that most members normally use. As you can see from your AstroGeometry screen, there are several menus listed along the Menu Bar.
Although your new AstroGeometry does have several drop-down menus, there are just a few features of the program that are not accessible through any of the available menus, and such features must therefore be accessed through hotkeys to be explained later. As is the case with most Windows programs, most selections on the menus also have hotkeys which are alternative ways to access features by pressing a combination of keyboard items.
In these instructions, from time to time, we will interchange from using menus to hotkeys so you get used to the idea of using either one. This is standard with Windows programs and if you are confused by what you just read, please just read on and you will understand what we mean. The word click means to depress the left mouse button after situating the pointing arrow that the mouse controls over the screen object that is to be clicked.
Right-click means to depress the RIGHT mouse button after situating the pointing arrow that the mouse controls over the screen object that is to be clicked.
Quaoar meaning in astrology what rules
If an object button, text box, menu selection, etc. The word planet is used as a general term which can mean an actual planet, an asteroid, an astronomical point, or the Earths Moon. The word glyph means a symbol used to represent a planet in a pictorial manner rather than by using the planets full name or an abbreviation thereof.
Following are the most common glyphs used in AstroGeometry:. You do this the same way you do it for the windows of other software programs. If you do not know how to do this, check with a friend or your Windows manuals. But very quickly, you can adjust the size of the Full Screen Grid by pointing the mouse at any of the four corners of the window. For example, move the arrow of your mouse to the upper left corner of the window. Move it around this corner very slowly until you see the white arrow disappear and a black double-arrow appear. There are two types of black double-arrows; one type points to the left and right, and the other type points diagonally.
You should see the Full Screen Aspects Window become larger. Let go of the mouse button when you have made the window the size you want. To decrease the size of the window, point the arrow at the upper left corner and move the arrow slowly around the small corner area until you see one of the Resizing Arrows appear. Hold down the left mouse button and move your mouse to the right until the window is the size you want. Remember there are two types of Resizing Arrows. One type has black arrows pointing diagonally and the other has black arrows pointing to the right and left.
When you get a diagonal Resizing Arrow, you can change both the height and width of the window; the other arrows only allow you to change the width. You can get diagonal Resizing Arrows to appear at any of the four corners of the window. The left-right Resizing Arrows appear when you point the white arrow along the vertical borders of the window. AstroGeometry The Magi Society If you point the arrow to any part of the blue bar at the top of the window and hold down the left mouse button, the whole window will move wherever you move your mouse.
You can resize the Full Screen Grid in any of the data modes. Now let us get started using AstroGeometry. We are going to give you a very quick tour on how to create a chart and a CAC Combined Alignment Chart and obtain a listing of the interaspects. In these instructions, we are assuming that you are familiar with the terms and concepts that we introduced in our books.
This is done using standard Windows operating system procedures. When you move the mouse, you will move a white arrow. If you point the white arrow to any of the Scroll Buttons, and click the left mouse button, the data in the scroll area will move in the direction that the arrowhead points to. From now on, whenever we say point the white arrow to a certain area and click, what we mean is to move the mouse so that the white arrow is pointing right at a certain area and click the left mouse button.
There is also something called a Scroll Box. This is the box that is the same size as a Scroll Button, but has no arrowhead or anything in it, and is located between the Scroll Buttons. If you point the white arrow to the Scroll Box that is at the bottom edge of the Left Data Grid, and you hold down the left mouse button and move the mouse to the right or left, the data in the scroll area will move in the direction of your mouse. This is known as click and drag.
The AstroGeometry program's graphics will always display the positions of the planets in degrees and decimals - the Magi AstroChart does not ever display the positions of the planets in degrees plus minutes. We believe this is much more user friendly and will help to bring more popularity to astrology.
The public has great trouble dealing with degrees and minutes. However, for the Data Display Area on the Main Screen, those of you who are astrology purists can choose to display the astrological data in decimal form or you can tell AstroGeometry to use degrees and minutes. Now the data in the Data Display Area will be in degrees-and-minutes format.
In addition, the positions for the Transit date will have the degrees-and-minutes format. To verify this, open the Data drop-down menu and click on the first option Display Transit Data Grid. This label can serve as a reminder that the date and time info entered in the Transit Data area can be for an actual transit or for a person. You will notice that the positions in the data grid in this window are also in the degrees-and-minutes format.
QUICK TOUR From our experience with software programs we have learned that the easiest way to teach you how to use AstroGeometry is to create a quick tour so that you can experience the full capabilities of AstroGeometry by following step-by-step procedures. Please follow the instructions on these pages, in the same order that they are provided, as precisely as possible.
The entire quick tour should only take about 30 minutes. At the end of this lesson, you will be able to enter the world of Magi Astrology, the most useful and most accurate astrology available anywhere. AstroGeometry The Magi Society The purpose of this tour is to teach you how easy it is to use AstroGeometry; to create a chart and a CAC so you can compare your own chart with anyone else's in order to see what linkages and activations you have with that person.
Please recall that we call such a person the Connected Person. Once the program is fully loaded, your computer screen will display a window which looks similar to the one shown in the screenshot shown below:. Look closely at the chart wheel. Notice that there are aspect lines of various colors. Solid lines represent applying aspects, Dotted lines represent separating aspects. Green lines are used to designate trines and conjunctions, parallels and contraparallels while Red lines are used to indicate clashes; squares and oppositions.
Blue lines are used for quincunxes and Black lines are used for sextiles and semi-sextiles. A Magi AstroChart is unique so unique that it is patented. It consists of an outer circle and an inner hexagram. Upon these two geometric figures appear the planetary glyphs symbols that represent planets.
The glyph for each planet chosen to be displayed appears twice on a Magi AstroChart once on the outside of the circle and again on the inside of the hexagram. A planets position on the circle represents its planetary longitude either geocentric or heliocentric depending on which mode is being displayed at the time. A planets position on the hexagram represents its position in the secondary dimension either its declination in the Geocentric mode or its Latitude in the Heliocentric mode. AstroGeometry The Magi Society Although the glyphs appear on the inside of the hexagram nearly all the time, occasionally one or two will appear on the outside of the hexagram.
This occurs when a planets declination or latitude reaches 23 27 degrees or higher or 27 degrees or lower. The Magi AstroChart example below is for the heliocentric dimension. You can tell this because the symbol for the Earth, a circle with a cross in it, appears in the exact center of the hexagram. At the very top of the hexagram, the symbol for Pallas appears outside the hexagram because its latitude is Below is a Magi AstroChart with all aspect lines turned off. You do this by entering, separately, the month, day, and year. If you enter the data manually, be sure to use 4 digits for the year.
You can also enter any, or all, of the Month-Day-Year items using the scroll arrows until the correct values are reached. Next, we must enter a time of birth. For now, just enter 12 for the hour, 00 for the minute, and press the PM Radio button. You have specified a birth time of 12 Oclock Noon. This is probably not your birth time but it is close enough for our purposes since we are only going to create a CAC and check for interaspects of the planets.
We are not going to worry about your exact time of birth right now. We will teach you about entering exact times later. In this tour, we just want to get a Magi AstroChart of your birthday up on the screen as quickly as possible. To do that, now that your birth date has been entered into the Date Box, just click on the Recalculate button located on the left border of the Main Screen about two thirds of the way down from the top.
Presto, the chart that is displayed is now the Magi AstroChart of the day you were born! It is as simple as that. To make the Magi AstroChart full screen, do the following:. Click on the Data selection on the Menu Bar. On the drop-down menu that appears, highlight and click on the Full screen chartwheel toggle selection.
The Magi AstroChart will now be the size of your whole computer screen. To return to the original, non-full-screen mode, just repeat the two steps just described that is what a toggle is it allows you to alternate between two different things. At this point we would like to emphasize that there is nothing to be afraid of with AstroGeometry. If you make mistakes and do not know how to undo the mistake, simply shut down the program and reload it to start all over. You can close AstroGeometry in the same way you close any other Windows program, by clicking the File Menu and then selecting the Exit choice.
You can restart AstroGeometry again by double-clicking its icon. Before we go on to create a CAC between you and a person you have an interest in, we want to put your name on the Magi AstroChart. To do this, locate the Name data entry box at the top of the Data Entry Area. The Name box is marked with the word Name just to the left of the actual box. Type your name in the white area and press the Recalculate button to make AstroGeometry accept the name you typed in. Now the program has stored your name, and displayed it on the chart.
If you recall, in our book about love and money, we refer to this other person as the Connected Person. To find out what linkages you have with any Connected Person, all you have to do is to tell the AstroGeometry program the birth date of the Connected Person. This is easy to do just enter the birth date in the Transit Data area of the Data Entry Area on the right hand side in the same manner you entered the data in the Natal Data subarea. As far as generating a CAC goes, a date is a date whether for a person or a transit.
Once that is done, simply press the Recalculate Button. All required data has been entered. Since we cant tailor this manual for every reader, we will use the birthdates of a famous couple Steve Allen and Jayne Meadows an example that has previously appeared on the Magi Societys main website. Steve Allen was born on December 26, His wife of many years, Jayne Meadows, was born on September 27, On the drop-down menu that appears, highlight and click on CAC.
When you do so, the CAC will appear. Thats all there is to it. Following is a screenshot of the resulting CAC. You will notice several things about the CAC. First, the planets for the person whose birth date was entered in the Natal Data area Jayne are displayed in Black; while those for the person whose birth date was entered in the Transit area Steve are displayed in Red.
This makes it very easy to determine which planet belongs to which person. If you have trouble remembering which color belongs to which person, no problem it appears right on the CAC the persons color is mentioned right after the persons name. For those completely unfamiliar with astrology, the various lines that connect some of the planets represent the aspects between the planets. In a CAC, each line represents an Interaspect an aspect that exists between one planet of a first person and another planet of a second person.
Notice that some of the aspect lines are solid and some are dashed. In a Transit Chart, the solid lines represent aspects that are approaching becoming more exact while the dashed lines represent aspects that are separating. For a CAC, the meaning of solid vs. Under certain circumstances, this can make things more difficult. For example, sometimes you may want to look only at the interaspects between Jupiter and Chiron, or only the interaspects to the other person's Saturn. All the other aspect lines make it more difficult to concentrate on those.
No problem - AstroGeometry has a fabulous feature that lets you select which planets you want to look at for each person. You can choose to look at them all, or any combination you wish. On the drop-down menu that appears, again select the Select Planets choice. When you do so, a window labeled Select Planetary Body Options appears. This window is divided into three sections: 1 Transiting Data on the left; 2 Natal Data taking up most of the right; and 3 a File Control Section on the far right.
Simply check to select or uncheck the planets you wish to include in the interaspect generation and display. The Magi Society added the Part of Fortune as one of the calculated points. In the screenshot above, it appears as PartF. This label will not always show - because, it is toggled with the Vertex.
UPDATE – QUAOAR
This selection will tell you which option is currently active Vertex or PartF. Try it now. Note whether Vertex or PartF is visible. Then close the Select Planetary Body options window which option will be displayed is determined at the time this window is opened. Now, look at the Part of F. Click on the Part of F. You will see that the change has been made to the 4th checkbox from the bottom. Since Steves birth date is entered in the Transit area, we will put a check in the box next to Venus in the Transiting section on the left side of the window and make sure that all other boxes in that section are UNchecked.
When we are finished, the window should look EXACTLY like the following with regards to the boxes that are checked your screen choices may be different as our sample screenshot if you have included the Extra Asteroids and Additional AstroBodies upgrades and have already added them to the Select Planets screen :.
Then, click the X box in the upper right corner of the window to close it. The window will close, and you will see the following in the Main Screen Graphics area:. If you review the first Allen-Meadows CAC, you can find these two interaspects but they do not just jump out at you. This way they are much easy to see. A CAC with just black and red planets is not very helpful to us unless there are lines representing the linkages and clashes so that we can easily see them.
Let us learn how to control which aspect lines will be drawn. Since we are presently working with a CAC, the lines will represent Interaspects. We do this using the Select Planets Menu and choice just as we did to limit the planets displayed. If you draw lines between all of them, the resulting chart will have so many lines that it is usually quite difficult to pick out the most important aspects or interaspects.
Most often, what you really want to do is to draw lines only for certain types of angles, like oppositions plus squares, or trines plus sextiles. This is exactly what AstroGeometry allows you to do; and it even draws in different line colors for them on your computer screen. If you click on the menu labeled Select Line Angles you will see a drop-down menu that gives you seventeen choices; each choice is an Angle Type. Click on any of the Angle Types to draw lines only for the angles that make up the Angle Type you selected.
The AstroGeometry program will draw connecting lines in your Combined Alignment Chart for every interaspect that is one of these linkages. The degree interaspect called trine is a linkage and is very powerful. Notice that all Linkage lines are displayed in Green. If you select the Pure Linkages option, only the conjunctions, trines, and parallels will be displayed the contra-parallels and quincunxes will NOT.
The Sextile is a Semi-Linkage not at powerful as a Linkage. The default program setting is to display all 30 degree angles. To look for clashes activations , open the Select Line Angles menu and click on Clashes. When you do that, all the clashes in your Combined Alignment Chart will be connected with red lines with one exception: Saturn contraparallels and Saturn quincunxes will be displayed in green. However, dont let the color fool you they ARE clashes even though the angles are ones normally associated with linkages. The Clashes that are displayed in red are 90 and degrees called square and opposition, respectively.
In this case, all lines will be blue no red or green lines appear. Selecting Quintiles and Bi-Quintiles from the menu will display degree and degree angles in a magenta color. We did not deal with these angles in any of our books yet. We suggest that you ignore them. But we have built them into your program because we will discuss them in a future book. The results of interaspects that are 72 or degrees are very complicated and require almost a whole new book to understand. The All degree Aspects selection does just what you would think displays all inter aspects that are multiples of 30 degrees: 0, 30, 60 This is the option that is automatically set when you first load AstroGeometry.
AstroGeometry The Magi Society The 45, 90, , and degree aspects are what are commonly known as hard aspects-clashes plus semiclashes. The purpose is to help you find Combined Planetary Geometry. Finally, notice that most selections on the Select Line Angles drop-down menu have a hotkey or 2-key hotkey combination. This provides a second method of changing which aspects are displayed without accessing the drop down menu.
These are shortcuts so you can quickly change the chartwheel display. Following is a list of the angles displayed by the various hotkeys Function keys or hotkey combinations:. The F keys just listed affect the chart lines and data displayed in grids in all data modes. This removes the default check mark and you will see the chart without any aspect lines at all!
AstroGeometry allows you to select any one of seven data modes. Each mode is designed to provide you with the type of astrological information that you want and need in order to make the most accurate analysis. This is a handy feature of the AstroGeometry program: to view the data grids you may also place a check mark in the box labeled Show Grids in the lower part of the right hand data entry area.
This feature allows you to turn on or turn off data grids when needed without using the Aspects drop down menu. To view date and time data in the Data Grids check off the Exact box. This is essential when you want to know when a transiting aspect is exact. Check Show Grids to allow the Data Grids to pop up. The first, the Longitude Data Grid window, shows the data associated with longitudinal natal aspects.
The label on the grid will read Declinations. If you own the heliocentric upgrade, then Latitudes can be displayed when a heliocentric chart is chosen and the label will read Latitudes. Since the same windows open up, you may wonder Whats different? The answer to that is the TYPE of data displayed in the windows. These choices calculate and display the aspects that exist between the planetary positions for the date and time entered in the Natal section and those for the date and time entered in the Transit section. The Transits part of the choice label refers to Transits, which occur at a particular time, to the planetary positions of a Chart Person.
The grid in this window gives the positions of the midpoints of the planets for the Chart Person whose birth date is entered in the Natal section of the Main Screen. The last 2 columns, Helio and Lat may be blank. If you purchased the helio upgrade they will contain data. If you first display clashes and then display linkages, or vice versa, you will notice changes in the Magi AstroChart Graphics Area.
This gives you a visual presentation of the difference. First, with Pure Linkages selected, bring up the two Data Grid windows using the Aspects drop-down menu and sub-menu as described previously. Remember, the Show grids box must be checked in the data entry area. Look at the Longitude Data Grid window. See the next screenshot. The data grid windows will show the data dependent upon the type of aspects chosen in the Select Angle menu. The first row of the data grid in this window should show the transiting Venus natal Neptune linkage.
When the Selection window closes down, bring up the Longitude Data Grid window again. This time the first row should list the transiting Sun square natal Sun square. This is telling you that their Suns are square to each other. When you have finished examining this window, return your settings to the All Linkages selection.
Each contains 7 identically-named columns which contain essentially the same types of information. They differ mainly in which aspects can appear. If you have purchased the heliocentric upgrade, then there is another difference WHICH planets can appear. If it is Geocentric, then Earth cannot appear. If for the Heliocentric Dimension, then the Sun and Moon cannot appear. How can you tell if the Grids are for the Geo. If for the Heliocentric, the heading will. Again, this only applies if you have purchased the heliocentric upgrade. Now, lets look at each column in greater detail. The first column simply lists the number of the interaspect so the first column vertically downward will always read 1, 2, 3, 4, etc.
The second and fourth columns list the names of the planets that form the interaspect and the third column contains the angle of the interaspect, such as , and The planet for the Connected Person, whose birth date was entered in the Transit sub-area of the Data Entry Area of the Main Screen, is listed in the second column labeled Tr ; and the planet for the Chart person, whose birth date was entered in the Natal sub-area of the Data Entry Area of the Main Screen, is in the fourth column.
In this example, Steve Allen is the Connected Person with his planets listed in the Tr column and Jayne Meadows is the Chart Person with her planets listed in the natal column. The fifth column, labeled Deg Sep degree of separation lists the number of degrees the interaspect is from being exact. An aspect that is exact has 0 degrees of separation. This column also contains either the letter a or the letter s. The a means that the aspect is approaching or it is becoming more exact and the amount of separation is growing smaller.
An s means that the aspect is separating it is becoming less exact and the amount of separation is growing. The sixth column tells you the number of days since or until the interaspect will be exact. The last column gives the date and time when the aspect was or will be exact. Exact data is not needed for chart comparisons between two people. NOTE: When using an actual Transit date and time, all the data in columns 5 through 7 are very useful.
However, when the birth date entered in the Transit area of the Main Screen is for a person for the purpose of creating an interpersonal CAC, then the only information in those three columns that is useful is the degrees of separation found in column 5. Continuing with the listing of the Longitudinal interaspects, the second row tells us that Steves Venus column 2 is 0. Always look for a scroll bar on the right side of the Data Grid windows if one exists, then there are more interaspects than can be displayed at one time in the window.
Row 1 displays an interaspect between Steves Sun and Jaynes Vesta. In the column labeled Asp we find the symbol for parallel two forward slashes as opposed to backslashes. The top of a forward slash is farther to the right than its bottom; the top of a backslash is farther to the LEFT than its bottom. Thus, row 1 tells us that Steves Sun is parallel to Jaynes Vesta. The symbol for contraparallel looks like the symbol for parallel except that there is a horizontal line running through the middle of it.
If there had been such a line then the interaspect would have been a contra-parallel. Select Natal Aspects from the Aspects drop-down menu. The Data Grid that appears is nearly identical to the one that appears for Data Mode 8. The only difference is that Column 2 is labeled natal instead of Tr.
Note that Click on the word natal at the top of the column to sort the planets in the natal column or click on the words Deg Sep to sort by how close or far apart aspects are. Thus, you can view the interaspects in order of approaching vs. This is a very handy feature! Natalization is the name we gave to the theory that when anything happens for the first time, that thing is born and has a birth chart; the key is that the astrological energy of the moment of time of birth is retained.
Of course this is especially true about the birth of a person. The astrological energy of the moment a person is born is retained by that person for a lifetime. We think that this is why interaspects work. The astrological energies of two persons are interacting in their relationship and the results are predictable. Now let us take this a step further. Every day, as the planets move in the sky and create new alignments, the planets in the sky also are signs of the astrological energy of the moment. When a planet creates a transit, the transit creates a result very similar to the energy of the same interaspect that occurs with a person.
In other words, when a person was born with Jupiter in say 12 degrees of Aries, and that persons Jupiter forms a Jupiter-Chiron Golden Linkage with a Connected Person, then the results of the Golden Linkage are very similar to the results of a transit that would occur whenever Jupiter is in 12 degrees of Aries. In other words, there is remarkable similarity between a transit and an interaspect.
For this reason, AstroGeometry is designed so that transits are treated in the same way as interaspects are. With the AstroGeometry program, you can calculate transits by entering date and time information into the Transit portion of the Data Entry Area of the Main Screen. An example will show you exactly how to do this. Let us find out what Clintons transits were on November 5, , the day he won the presidential elections. Clinton was born at A. CST on August 19, Enter this info in the Natal section of the Data Entry Area.
You can use 12 P. Make sure the Exact checkbox is checked and press the Recalculate button to make the new date active. You will see that row seven lists this transit - Chiron Jupiter. The sixth column of the listing tells us that the transit was exact The exact date and time of the peak of the transit is listed in the last column if you have put a checkmark in the Exact box on the data entry box. This was a Golden Transit and corresponds nicely with the fact Clinton peaked in the polls just three days before the election.
You will now see, in the lower left part of the Graphics Area, that there is a red Chiron that is almost exactly on Clintons natal Jupiter, the black Jupiter in This is a remarkably powerful transit. In fact, our website explains that this is a Cinderella Transit and a Golden Transit. AstroGeometry The Magi Society The sixth column of the listing tells us that the transit was exact The most helpful symmetrical patterns are the ones that are created by connecting only degree type aspects, and this is exactly what the F5 filter does.
With this filer, you can see symmetrical patterns within all the lines that are drawn. When you do so, you are telling AstroGeometry to draw connecting lines between every pair of planets that form degree linkages. Grand Trines are composed of degree linkages. For example, if you look at the chart of Clintons transits on November 5, , you will see that there actually is a Grand Trine between Clintons natal Saturn at 2. Select only Saturn and Pluto in Natal and Transit columns.
However, you might miss seeing this because the transiting Pluto and Saturn are not connected by any line. For the purposes of this example, lets limit the planets being displayed to those involved in the example. To solve the problem of the third side of the Grand Trine not displaying, we built in a special feature the Also Show Natal Aspect Lines option on the Select Line Angles drop-down menu. This function is another toggled function select it once and it activates; select it again and it turns off. Activate the feature. When the feature is active, there will be a checkmark to the left of the Also Show Natal Aspect Lines selection on the drop-down menu.
The final step we need to perform in order to see the completed Grand Trine is to switch the date and time data so that the date for which 2 planets whose line is not currently showing the transit date, becomes the natal date and vice versa. Then, since we have told the program to also show natal aspects, the missing side will appear. It would be a chore to have to manually switch the data.
No problem the software include a function to do it automatically with just a couple of clicks. Open the Data drop-down menu and click on the selection labeled Switch Data. When you do so, the menu closes down, the data has been switched, and the completed Grand Trine appears. If you have followed the example the chart should now look like the chartwheel on the next page. Hint: Clicking the Switch Data option again returns the data values to their original places. Searching for Symmetrical Combined Planetary Geometry is one of the hardest things you have learn to do in this program.
If you are having problems getting the hang of it all, we suggest that you call your most computer literate friend, and ask for help. Start by clicking the Save as. OPT File selection on the File menu. A new window will appear and it is a standard Windows Save File window. This new window should be rectangular and should have a horizontal band along the top that has the words Save natal and transit data.
Save the file under a name that makes sense. You can use as many letters in the name as your Windows operating system allows. By default, the program will copy whatever is in the Name section of the Data Entry area or you may type a name and press the SAVE button. Your file will be saved with the. All Magi Astrology software programs automatically save their files with the file name extension of ". CAC file. If you wanted to save Bill Clintons chart file along with the chart we used for his Presidential Win you can use this option.